PI4 et RSP1 non reconnu sur port USB

[LETERRIER Bertrand 0]

bonjour, Est ce que l'un d'entre vous a utilisé la clef SDR RSP1 sur un raspberry ? Pour ma part, elle n'est pas reconnue au niveau du driver. Je tourne avec la suite OPENPLOTTER que je viens d'installer. J'ai tenté d'installer les drivers a la main avec https://ranous.wordpress.com/rtl-sdr4linux/ mais sans succes.

Cela fonctionne bien sur Windows 10. Merci.
Au final j'ai çà :

pi@openplotter:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1df7:2500  
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@openplotter:~ $ dmesg | grep usb
[    0.132932] usbcore: registered new interface driver usbfs
[    0.132989] usbcore: registered new interface driver hub
[    0.133108] usbcore: registered new device driver usb
[    0.133450] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[    1.106562] usbcore: registered new interface driver r8152
[    1.106632] usbcore: registered new interface driver lan78xx
[    1.106691] usbcore: registered new interface driver smsc95xx
[    1.111205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.111224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111240] usb usb1: Product: xHCI Host Controller
[    1.111256] usb usb1: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd
[    1.111271] usb usb1: SerialNumber: 0000:01:00.0
[    1.113189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.113206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.113221] usb usb2: Product: xHCI Host Controller
[    1.113236] usb usb2: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd
[    1.113251] usb usb2: SerialNumber: 0000:01:00.0
[    1.116383] usbcore: registered new interface driver uas
[    1.116490] usbcore: registered new interface driver usb-storage
[    1.128137] usbcore: registered new interface driver usbhid
[    1.128149] usbhid: USB HID core driver
[    1.475483] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.658268] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.658288] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.658305] usb 1-1: Product: USB2.0 Hub
[    1.985495] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
[    2.116105] usb 1-1.4: New USB device found, idVendor=1df7, idProduct=2500, bcdDevice= 2.00
[    2.116123] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.931698] usbcore: registered new interface driver brcmfmac
pi@openplotter:~ $
 

[F5OWL 16]

Bonjour,

Le résultat de lsusb semble indiquer que vous utilisez un modèle de la marque SDRPlay.

J'ai l'impression que lien que vous utilisez concerne une clé RTL-SDR et non un RSP1.

Le guide d'installation pour linux du RSP1 est ici : https://www.sdrplay.com/some-guidance-for-linux-and-gnu-radio-users/

73,